NANOSTATIONS

Sırala:
Göster:
Nanostation M5 802.11a/n MIMO antenna, WiFi Wireless Outdoor CPE

DESCRIPTION

NanoStation M5 

The NanoStation M5 proves that efficiency can still be equated to affordability. Even if it’s low cost, its performance is luxurious. It has a maximum transmission speed of about 300 mbps, allowing it to serve multiple devices at one time. It follows the TDMA (Time Division Multiple Access) protocol, which permits users to effectively schedule time slots in order to maximize the transmission and lower the latency period. It works at a frequency of 5.5GHz, a channel that is not prone to noise and interference. The integrated antenna connects via the 2x2 MIMO technology with a reach of 16dBi, so it’s ideal for complexes or buildings made up of different floors. Paired with QoS, you can easily prioritize bandwidth allocation. 

It runs on an Atheros 24KC MIPS chipset with a clock speed of 400 MHz. It has a 32MB RAM and 8MB NAND Flash. 

PoE Connection 

The NanoStation M5 is equipped with the “intelligent PoE.” This means you can reset it through its power supply, not directly in the unit. This is accomplished via the dual Ethernet port, one of which is dedicated for PoE use. In the process, you’re able to make the most of your electric power and save yourself the hassle of dealing a lot of wires. You can also add an IP camera, which permits you to keep track of your property, among others, through a web-based access. 

Various Connectivity Options 

The NanoStation M5 can be used as an access point, connecting to hundreds of devices all at the same time, or as a client, which can be connected to other networks through a bridge. The level of flexibility makes this a fantastic and convenient addition to your networking system. 

Quick Monitoring Process 

The NanoStation M5 is easy to monitor through its strength indicators following the integration of 2 pairs of LEDs.

SPECIFICATION

Processor Specs: Atheros MIPS 24KC, 400 MHz
Memory: 32 MB SDRAM, 8 MB Flash
Networking Interface: Mikrotik
Operation mode: AP, Client, WDS
Encryption: WEP 64/128/152, WPA, WPA2, 802.1X
Wireless transmission speed: up to 300 Mbps
Standards: 802.11a/n
Gain: 16 dBi
Polarization: Dual Linear
Max. Power Consumption: 8 W
Max.output power: 28 dBm
Sensitivity: -96 dBm
Dimensions: 294x31x80 mm
Weight: 0.4 kg
Power Supply (PoE): 24V, 0.5A
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Operating Temperature: -30 ‒ 75° C
Operating Humidity: 5 - 95%
Supported OS: AirOS
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt

DOWNLOADS

Technical Specs / Datasheet - NanoStation M5

138 Usd

Ubiquiti NanoStation 5AC

DESCRIPTION
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy.
 
Sleek Industrial Design
 
The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry.
 
ns5ac-compact-design-feature

 

Dual Ethernet Connectivity
 
The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration.
ns5ac-feature-dual-ethernet
ns5ac-feature-umobile
Management Wi-Fi Radio
 
Each NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Improved Surge Protection
 
The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events.
ns5ac-feature-surge

 

Now with airOS®8
 
airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
 
ns5ac-prism-airos8
SPECIFICATION
Processor Specs Atheros MIPS 74Kc, 560 MHz
Memory 64 MB DDR2
Wireless transmission speed 450+ Mbps
Operating Frequency 5GHz
Interfaces (2) 10/100/1000 Mbps Ethernet Ports
Gain 16 dBi
Polarization Dual Linear
Max. Power Consumption 8.5W
Dimensions 257 x 84 x 41 mm (10.12 x 3.31 x 1.61")
Weight 233 g (8.22) oz
Power Supply 24V, 0.5A Gigabit PoE Supply (Included)
Power Method 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return) 24V Passive PoE (Pairs 4, 5+; 7, 8 Return)
Enclosure Characteristics UV Resistant Polycarbonate
Mounting Pole Mounting Kit Included
Operating Temperature -40 to 70° C (-40 to 158° F)
Operating Humidity 5 to 95% Noncondensing
DOWNLOADS

Technical Specs / Datasheet - NanoStation 5AC

208 Usd

Ubiquiti NanoStation 5AC Loco

DESCRIPTION
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy.
 
Sleek Industrial Design
 
The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry.
 
ns5ac-compact-design-feature

 

Ethernet Connectivity
 
Passive PoE (Pairs 4, 5+; 7, 8 Return)
ns5-acl-feature-dual-ethernet
ns5ac-feature-umobile
Management Wi-Fi Radio
 
Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Improved Surge Protection
 
The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events.
ns5ac-feature-surge

 

Now with airOS®8
 
airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
 
ns5ac-prism-airos8
SPECIFICATION

Processor Specs: Atheros MIPS 74Kc, 560 MHz
Memory: 64 MB DDR2
Wireless transmission speed: 450+ Mbps
Operating Frequency: 5GHz
Net. Interface: 10/100/1000 Mbps Ethernet Ports
Gain: 13 dBi
Polarization: Dual Linear
Max. Power Consumption: 8.5W
Dimensions: 179 x 77.5 x 59.1 mm (7.05 x 3.05 x 2.33")
Weight: 180 g (6.35 oz)
Power Supply: 24V, 0.5A Gigabit PoE Supply (not included)
Power Method: 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return) 24V Passive PoE (Pairs 4, 5+; 7, 8 Return)
Enclosure Characteristics: UV Resistant Polycarbonate
Mounting: Pole Mounting Kit Included
Operating Temperature: -40 to 70° C (-40 to 158° F)
Operating Humidity: 5 to 95% Noncondensing

DOWNLOADS

 

Technical Specs / Datasheet - NanoStation 5AC Loco

Ubiquiti NanoStation 5AC Loco 5-pack

DESCRIPTION
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy.
 
Sleek Industrial Design
 
The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry.
 
ns5ac-compact-design-feature

 

Ethernet Connectivity
 
Passive PoE (Pairs 4, 5+; 7, 8 Return)
ns5-acl-feature-dual-ethernet
ns5ac-feature-umobile
Management Wi-Fi Radio
 
Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Improved Surge Protection
 
The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events.
ns5ac-feature-surge

 

Now with airOS®8
 
airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
 
ns5ac-prism-airos8
SPECIFICATION
Processor Specs Atheros MIPS 74Kc, 560 MHz
Memory 64 MB DDR2
Wireless transmission speed 450+ Mbps
Operating Frequency 5GHz
Interfaces 10/100/1000 Mbps Ethernet Ports
Gain 13 dBi
Polarization Dual Linear
Max. Power Consumption 8.5W
Dimensions 179 x 77.5 x 59.1 mm (7.05 x 3.05 x 2.33")
Weight 180 g (6.35 oz)
Power Supply 24V, 0.5A Gigabit PoE Supply (not included)
Power Method 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return) 24V Passive PoE (Pairs 4, 5+; 7, 8 Return)
Enclosure Characteristics UV Resistant Polycarbonate
Mounting Pole Mounting Kit Included
Operating Temperature -40 to 70° C (-40 to 158° F)
Operating Humidity 5 to 95% Noncondensing

 

396 Usd

Nanostation Loco M5 802.11a/n MIMO antenna, WiFi Wireless Outdoor CPE

DESCRIPTION

NanoStation Loco M5 

Do you have to spend thousands of dollars just to have a very efficient and reliable wireless network? The answer is no. NanoStation Loco M5 is a great proof for that. A cost-effective solution, it performs just as well as its more expensive counterparts. Plus it has a very elegant form factor that can stand up against rain, snow, and heat. It’s truly a device that doesn’t immediately wear out, a perfect option for a long-term wireless network investment. 

High-performing 

The NanoStation Loco M5 is known for its much smaller size than the other NanoStation, which makes it ideal for residential or small building use. It has a good throughput of around 150 mbps, sufficient to cover multitudes of devices and users simultaneously. It has a great reach at 13dBi through its integrated antenna. It operates at a frequency of GHz, which is ideal if you want to maximize throughput. This signal is seldom interrupted by noise or clutter as most devices and appliances work on 2.4GHz frequency. 

AirMax 

The unit also makes use of the AirMax technology and its TDMA protocol. It lets you compartmentalize time schedules so you’ll be able to enjoy a smoother transmission and receipt of wireless connection. Moreover, you are also able to reduce latency, even if there are already a lot of devices that are connected into the network. It works very well along with quality of service so you can prioritize the allocation of the available bandwidth. 

NanoStation Loco M5 can be controlled via the software AirOS and AirController. It’s a web-based management interface. 

PoE 

The NanoStation Loco M5 is also compatible with a PoE (power over Ethernet setup) so you can deal with fewer wires. Moreover, you can now reset its power directly from the main source than on the equipment itself, saving you the hassle.

SPECIFICATION

Processor Specs: Atheros MIPS 24KC, 400 MHz
Memory: 32 MB SDRAM, 8 MB Flash
Networking Interface: 1x 10/100 Ethernet Port
Operating Frequency: 5170-5875 MHz
Operation mode: AP, Client, WDS
Encryption: WEP 64/128/152, WPA, WPA2, 802.1X
Wireless transmission speed: up to 300 Mbps
Standards: 802.11a/n
Gain: 13 dBi
Polarization: Dual Linear
Max. Power Consumption: 5.5 W
Max.output power: 23 dBm
Sensitivity: -83 dBm
Dimensions: 163x31x80 mm
Weight: 0.18 kg
Power Supply (PoE): 24V, 0.5A
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Operating Temperature: -30 ‒ 75° C
Operating Humidity: 5 - 95%
Supported OS: AirOS
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt

DOWNLOADS

 

Technical Specs / Datasheet - NanoStation Loco M5

104 Usd

Nanostation M2 802.11b/g/n MIMO antenna, WiFi Wireless Outdoor CPE

DESCRIPTION

NanoStation M2 

Increase throughput, maximize your connectivity, and improve relationships of various networks with the NanoStation M2 from Ubiquiti Network. It’s an affordable but reliable and compact wireless CPE bridge you can install immediately. 

By purchasing the product, you are able to take advantage of the following: 

Fast and Easy Installation Process 

When you’re dealing with technologies such as hardware, setting them up is almost always an arduous process, taking a lot of time and energy. The NanoStation M2, however, is very user friendly and can be installed in less than 30 minutes. The bundle already comes with the universal pole, as well as the mounting straps, so you can properly secure the device in place. The software, AirOS, already includes all the tools you need for convenient setup and control. 

Robust Compact Design 

The NanoStation M2 is lightweight and easy to remove and reinstall. Nevertheless, despite its size, it’s very durable and is designed to withstand different environmental conditions with hardly interfering with the distribution or amplification of the Internet signal across devices and networks. 

2x2 MIMO Technology 

The NanoStation M2 uses the 2x2 MIMO Technology, which means it doesn’t just allow you to share your connection seamlessly to different users but it also boosts your throughput to twofold. It also scores quite well in cross-polarity isolation at 11dBi for 2.4GHz and a whopping 16 dBi for 5GHz. The ideal score is around 20 dBi. The technology also allows you to choose a channel with the least interference or the best strength. The NanoStation M2 has a long range of around 15 kilometers. 

Integration of IP Video Camera 

If you’re planning to use an IP video camera, you can do so with NanoStation M2. You just have to make use of 802.3af adapter to make the setup 802.3af 48V, producing enough power to make the camera work.

SPECIFICATION

Processor Specs: Atheros MIPS 24KC, 400 MHz
Memory: 32 MB SDRAM, 8 MB Flash
Networking Interface: 2x 10/100 Ethernet Ports
Operating Frequency: 2412-2462 MHz
Operation mode: AP, Client, WDS
Encryption: WEP 64/128/152, WPA, WPA2, 802.1X
Wireless transmission speed: up to 300 Mbps
Standards: 802.11b/g/n
Gain: 11 dBi
Polarization: Dual Linear
Max. Power Consumption: 8 W
Max.output power: 28 dBm
Sensitivity: -83 dBm
Dimensions: 294x31x80 mm
Weight: 0.4 kg
Power Supply (PoE): 24V, 0.5A
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Operating Temperature: -30 ‒ 75° C
Operating Humidity: 5 - 95%
Supported OS: AirOS
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt

DOWNLOADS

 

Technical Specs / Datasheet - NanoStation M2

138 Usd

Nanostation Loco M2 802.11b/g/n MIMO antenna, WiFi Wireless Outdoor CPE

DESCRIPTION

NanoStation Loco M2 

Invest on a low-cost but high-performing CPE today. Get a NanoStation Loco M2. 

Price You Can Afford 

The NanoStation Loco M2 is positioned as a low-cost CPE. Since it doesn’t break the bank, it allows you to enjoy high cost savings without feeling the pinch on quality since it remains superior when it comes to throughput performance. This also makes small businesses, campuses, and neighborhoods, among others, to build a reliable network at a cost they can easily manage. 

2x2 MIMO Technology 

The NanoStation Loco M2 has a good range thanks to its 2x2 MIMO technology with gain of up to 8dBI. It is also an outdoor device, giving it more freedom to pick up clearer and stronger signal. As an added great feature, the external antenna has dual polarity and offers support to devices that are running on 802.11 g/n protocol. Compared to standard CPE, this one is definitely faster. It taps on the 2.4GHz frequency and broadcasts up to 150 mbps. 

The device is also equipped with Atheros MIPS 24KC with 400MHz speed, 8mB Flash, and 32MB SDRAM. 

Compact 

The device possesses a small form factor, which makes it very sleek and good looking aesthetically. Mounting the device is also more convenient, as it doesn’t ask for a lot of space in order to work. 

Power over Ethernet 

The NanoStation Loco M2 has been designed for certain remote functions. For example, administrators or network developers may be able to reset the circuitry without having to really go outside. It can also be transformed into a reliable power over Ethernet CPE by simply purchasing that adapter that makes this 802.3af compliant. 

Intuitive Software 

The CPE can be customized, modified, and controlled via the AirOS software, which can be comfortably installed and used even by those who don’t have a lot of experience with CPEs and related software. The interface is intuitive and easy to navigate.

SPECIFICATION

Processor Specs: Atheros MIPS 24KC, 400 MHz
Memory: 32 MB SDRAM, 8 MB Flash
Networking Interface: 1x 10/100 Ethernet Port
Operating Frequency: 2412-2462 MHz
Operation mode: AP, Client, WDS
Encryption: WEP 64/128/152, WPA, WPA2, 802.1X
Wireless transmission speed: up to 300 Mbps
Standards: 802.11b/g/n
Gain: 8 dBi
Polarization: Dual Linear
Max. Power Consumption: 5.5 W
Max.output power: 23 dBm
Sensitivity: -83 dBm
Dimensions: 163x31x80 mm
Weight: 0.18 kg
Power Supply (PoE): 24V, 0.5A
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Operating Temperature: -30 ‒ 75° C
Operating Humidity: 5 - 95%
Supported OS: AirOS
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt

DOWNLOADS

 

Technical Specs / Datasheet - NanoStation Loco M2

Nanostation M3 2x2 MIMO antenna, WiFi Wireless Outdoor CPE

DESCRIPTION

NanoStation M3 

The NanoStation M3 is an affordable CPE solution that operates on Atheros MIPS 24KC with 400MHz speed. 

Low Cost 

One of the most common misconceptions is that network systems need to be expensive. The NanoStation M3 therefore has definitely changed our way of thinking as being the first affordable broadband customer premise equipment that you can install outdoors. It also proves that cheap doesn’t have to mean poor quality as despite the affordability the broadband CPE continues impress users, even those with thorough network backgrounds. 

Elegant 

The NanoStation M3 is a beautifully designed hardware with excellent and durable case. It can last for a couple of years and can withstand different types of environmental issues including snow. The temperature can drop to as much as negative 30 degrees Celsius or high as 75 degrees Celsius, and it will still work fine. The ideal humidity, meanwhile, falls around 5 to 95 percent of condensation rate. The many vital parts of the device are properly protected, allowing them to work perfectly and deliver the kind of network and wireless support you or your business needs. The package already includes a mounting kit that fully secures the device outdoors. 

Good Range 

The NanoStation M3 is equipped with a dual-polarity linear antenna with a good gain of 13.7 dBi, which means the antenna can both receive and transmit wireless signal. It also has a decent reach of about 8 miles. It has a cross-pol isolate score of at least 28dB. 

PoE Output 

The device has its own secondary Ethernet port, so you can share the Internet speed with other devices. It is also compatible with PoE (power over Ethernet), which also allows you to run and manage an IP-based video camera. You can simply invest on an adapter that makes the connection compliant to 802.3af 48V.

SPECIFICATION

Processor Specs: Atheros MIPS 24KC, 400 MHz
Memory: 32 MB SDRAM, 8 MB Flash
Networking Interface: 2x 10/100 Ethernet Ports
Operating Frequency: 3400-3700 MHz
Operation mode: AP, Client, WDS
Encryption: WEP 64/128/152, WPA, WPA2, 802.1X
Wireless transmission speed: up to 300 Mbps
Gain: 13.7 dBi
Polarization: Dual Linear
Max. Power Consumption: 8 W
Max.output power: 25 dBm
Sensitivity: -94 dBm
Dimensions: 294x31x80 mm
Weight: 0.5 kg
Power Supply (PoE): 24V, 0.5A
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Operating Temperature: -30 ‒ 75° C
Operating Humidity: 5 - 95%
Supported OS: AirOS
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt

DOWNLOADS

 

Technical Specs / Datasheet - NanoStation M3

206 Usd

NanoStation Anti-Noise Shield

DESCRIPTION

Anti-noise shield for Ubiquiti NanoStation M2 and NanoStation M5 antennas. Substantially reduces interference from nearby devices. 

CNC technology used in manufacturing process, shield is made with needes precision. Shield is made entirely from grey coated aluminium.

NanoStation Loco Anti-Noise Shield

DESCRIPTION

Anti-noise shield for Ubiquiti NanoStation Loco M2 and NanoStation Loco M5 antennas. Substantially reduces interference from nearby devices. 

CNC technology used in manufacturing process, shield is made with needes precision. Shield is made entirely from grey coated aluminium.